Peningkatan Yield Produksi Tipe Metalis BOPP di Perusahaan PT XQZ dengan Metode Pendekatan QCDSMPE dan 4M+1E
DOI:
https://doi.org/10.54010/wnesrd.v5i1.30Keywords:
The high rejection rate, Barrier values, Yield productionAbstract
Metallic films are produced through a metalization process known as vapor deposition. This process involves coating aluminum onto a base polymer substrate, such as PET or PP, with the aim of enhancing the barrier properties of the underlying film material. Metallic films are used in various forms of packaging, including bags, caps, candy wrappers, labels, and also find applications in the electrical industry. The quality of the barrier provided by metallic films plays a crucial role in ensuring the desired shelf life of products. The high rejection rate of BOPP metallic film products is largely attributed to barrier values that fall outside the specified range. With a significant number of rejections, both production efficiency and yield are negatively affected. Therefore, immediate corrective measures are necessary to prevent potential product losses.
References
Ahuja, A., & Baboo, A. (2021). Packaging and Shelf Life Extension of Food Products: A Review. Journal of Food Science and Technology, 58(1), 1-14.
Agustian, H., & Aji, Y. R. (2021). Analisis Penurunan Yield Produksi pada Proses Pembuatan Film Metalis BOPP di PT ABC. Jurnal Teknik Industri, 11(1), 9-17.
Ghorbel, A., & Saad, A. (2020). Enhancing the Barrier Properties of BOPP Films by Surface Functionalization. Packaging Technology and Science, 33(12), 633-642.
Gupta, V., Kanchan, V., & Sharma, V. (2019). Influence of Packaging Materials on the Shelf Life of Food Products: A Review. Food Packaging and Shelf Life, 21, 100329.
Hasan, M., Hossain, M. A., & Islam, S. (2020). Investigation of Yield Loss in Manufacturing Process: A Case Study of a Packaging Industry. International Journal of Industrial and Manufacturing Engineering, 14(5), 365-376.
Hermawan, D., & Triyono, A. (2020). Analisis Kualitas dan Produktivitas pada Proses Produksi Film Metalis BOPP di PT XYZ. Jurnal Ilmiah Teknik Industri, 19(2), 89-99.
Kim, J. Y., & Ha, J. W. (2020). Improvement of Packaging Efficiency through Lean Six Sigma Methodology in a Food Manufacturing Company. Journal of Food Science and Technology, 57(9), 3073-3085.
Kusuma, B., & Rahayu, I. (2022). Analisis Kualitas Bahan Baku dalam Pengaruh Penurunan Yield Produksi Film Metalis BOPP di PT LMN. Jurnal Manajemen dan Bisnis Indonesia, 9(1), 17-26.
Pranoto, E. A., & Sari, N. N. (2019). Perbaikan Yield Produksi Melalui Analisis Penyebab Reject pada Film Metalis BOPP di PT PQR. Jurnal Rekayasa Proses, 13(2), 98-108.
Ratti, C. (2019). Packaging Waste Management: A Literature Review. Journal of Environmental Management, 234, 439-450.
Saha, R., Raju, S., & Ghosh, A. (2021). Performance Evaluation of Flexible Packaging Films: A Review. Packaging Technology and Science, 34(3), 163-183.
Setiawan, D., & Permana, A. S. (2020). Penggunaan Metode QCDSMPE dalam Meningkatkan Efisiensi Produksi Film Metalis BOPP di PT XYZ. Jurnal Teknik Industri, 10(2), 64-74.
Singh, A. K., Dixit, S., & Dikshit, A. (2019). Barrier Packaging for Food Products: Design, Materials, and Applications. Food Packaging and Shelf Life, 21, 100310.
Subekti, R., & Santosa, B. (2021). Pengaruh Perubahan Standar Material dan Tekanan Roll terhadap Penurunan Reject pada Film Metalis BOPP di PT ABC. Jurnal Ilmiah Teknik Industri, 20(1), 45-55.
Verma, S., Chaudhary, A., & Sharma, S. (2020). Packaging Materials and Their Impact on the Environment: A Review. Journal of Environmental Chemical Engineering, 8(6), 104155.
Yadav, M., & Choudhury, B. (2020). Influence of Packaging Material on Food Quality and Shelf Life: A Review. Food Packaging and Shelf Life, 26, 100584.
Downloads
Published
Issue
Section
Citation Check
License
Copyright (c) 2024 Yayan Heru Haerudin, M. Amirul Ghiffari, Wisnu Bayu Pratama
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.